Downcut Router Bits for Acrylic - Single Flute Spiral
- Brand: Crown Norge
- Product Code: SF-SPIRAL-A-DC
- Availability: In Stock
Single Flute Downcut Spiral Router Bits with geometry designed for cutting acrylic.
The downward spiral is especially useful to create downward chip flow and hold the part to the table during cutting. The special geometery is designed to give best edge finish on hard acrylic plastics.
| Part No. | Cutting Diameter = A | Shank Diameter = B | Length of cut (LOC) = C | Overall length (OAL) = D | Price | Quantity | ||
|---|---|---|---|---|---|---|---|---|
| S1-1.0/3-3-38 A-DC | 1 | 3 | 3 | 38 | £21.30 | |||
| S1-1.5/3-4-38 A-DC | 1.5 | 3 | 4 | 38 | £21.30 | |||
| S1-2.0/3-6-38 A-DC | 2 | 3 | 6 | 38 | £21.30 | |||
| S1-2.0/6-6-50 A-DC | 2 | 6 | 6 | 50 | £26.90 | |||
| S1-3.0/3-6-38 A-DC | 3 | 3 | 6 | 38 | £18.20 | |||
| S1-3.0/3-11-38 A-DC | 3 | 3 | 11 | 38 | £18.20 | |||
| S1-3.0/6-6-50 A-DC | 3 | 6 | 6 | 50 | £26.90 | |||
| S1-3.0/6-11-50 A-DC | 3 | 6 | 11 | 50 | £26.90 | |||
| S1-4.0/4-12-50 A-DC | 4 | 4 | 12 | 50 | £20.40 | |||
| S1-4.0/4-14-50 A-DC | 4 | 4 | 14 | 50 | £20.40 | |||
| S1-4.0/6-8-50 A-DC | 4 | 6 | 8 | 50 | £28.20 | |||
| S1-4.0/6-12-50 A-DC | 4 | 6 | 12 | 50 | £28.20 | |||
| S1-4.0/6-14-50 A-DC | 4 | 6 | 14 | 50 | £28.20 | |||
| S1-5.0/6-12-50 A-DC | 5 | 6 | 12 | 50 | £27.30 | |||
| S1-5.0/6-16-60 A-DC | 5 | 6 | 16 | 50 | £27.30 | |||
| S1-5.0/6-22-60 A-DC | 5 | 6 | 22 | 60 | £29.10 | |||
| S1-6.0/6-12-50 A-DC | 6 | 6 | 12 | 50 | £26.80 | |||
| S1-6.0/6-22-60 A-DC | 6 | 6 | 22 | 60 | £27.10 | |||
| S1-8.0/8-22-64 A-DC | 8 | 8 | 22 | 64 | £43.30 | |||
| S1-8.0/8-32-70 A-DC | 8 | 8 | 32 | 70 | £46.90 | |||
| S1-10.0/10-22-64 A-DC | 10 | 10 | 22 | 64 | £48.20 |